Basement Floor Coatings
A sealed, easy-to-clean floor for below-grade space, with the moisture testing that basements specifically need before anything goes down.
- Moisture-vapor barrier as the first coat, which basements need most
- Slab moisture read before we quote, not after the coating lifts
- Seals the concrete so the space smells less like a basement
- Reflects light, which makes a big difference in a low-light room
- Holds up under gym equipment, storage shelving, and laundry
Commonly used for: Finished basements, Utility rooms, Basement gyms
What to Expect
A basement slab sits below ground, so it pushes moisture up from underneath, and that is what lifts most failed basement floors. We check the slab for moisture before we quote, and the first coat that goes down is always a moisture-vapor barrier. In a basement that is not an extra, it is the reason the floor stays put.
Every one of these is built the same way: grind the slab back to bare concrete, lay a moisture-vapor barrier, then the epoxy base coat, then a polyaspartic topcoat over the top. More on how we build a floor.
Finishes That Suit It
Chip Flake
Color flakes broadcast into the wet base coat, then sealed under a clear topcoat. Hides dust, tire marks, and small debris better than anything else we install.
Solid Color
One even color across the whole slab, no flake or texture. Clean and simple, and usually the most affordable way to get a sealed floor.
Metallic
Metallic pigments swirled into the resin for a marbled, almost three-dimensional look. No two floors come out the same.
Other Concrete We Finish
Garages
The surface we coat most. Ground down to bare concrete, sealed, and topcoated so hot tires, jack stands, and dropped tools do not take it apart.
Learn morePatios
Outdoor concrete finished with texture for grip and a polyaspartic topcoat that holds its color in the sun.
Learn moreDriveways
Full vehicle weight, full sun, full weather. Driveways get the most durable build we install, with texture for traction on any slope.
Learn moreWalkways
Entries, paths, and steps finished with a high-grip texture, tying the approach to the house into the same finish as the patio or driveway.
Learn moreConcrete Polishing
No coating at all. The slab itself is densified and mechanically polished through progressive diamond grits until the concrete is the finished floor.
Learn more